List of all I/O Connections

[1] [2][3][4][5][6][7][8][9]

3964R-RK512 driver (Win, CE)

Driver for 3964R/RK512

AB ControlLogix Ethernet (Win, CE)

Direct TCP/IP driver for ControlLogix 5550 and 5555. The driver supports direct browsing of variables from the PLC.

Allen Bradley DF1-driver (Win, CE)

For all Allen Bradley PLCs supporting DF1. The driver works half duplex

Allen Bradley RS-Linx driver (Win)

Supports all connections which are available with RS Linx (http://www.software.rockwell.com/rslinx/)

Applicom driver (Win)

Driver for all Applicom interface cards, which support MPI or Modbus Plus. (http:\www.applicom-int.com)

Applicom IO configuration (Win)

Driver for Applicom IO cards (Direct Link)

Archive driver (RAW format) (Win, CE)

Writes data cyclically to the harddisk in RAW format. (Only values, no timestamps, no status information). The data have to be opened / further processed with external tools. (Tools only as examples available from COPA-DATA)

ARCNET - Driver for ABB (Win)

Arcnet driver for ABB PLCs based on Arcnet Interface Card from So Hard

Arcnet driver for PCX20 cards (Win)

Arcnet driver based on USTAP for PCX20 cards from Contemporary Controls (before Digitronic) necessary. http://www.ccontrols.com

AS-interface (Win)

For Bihl+Widemann AS-i configurations

B+R TCP-IP driver (Win)

Driver for B+R Burklimat or B+R System 2000 PLCs. Needs no PVI software but a special handling-modul in the PLC witch can only orderd from B+R . (www.br-automation.com)

B+R-PVI based driver (Win, CE)

Standard B+R driver for B+R PLCs. The driver uses the PVI interface software from B+R. The driver supports spontaneous data exchange and hysteresis. (www.br-automation.com)

Bachmann M1 driver (Win)

Direct TCP/IP driver for Bachmann M1 PLCs (www.bachmann.at)

Bacnet and DDC4000 driver (Win)

ASHRAE compliant Bacnet driver for "BACnet/IP, Annex J". The driver supports spontaneous data traffic.

Beckhoff BC-BK 9000 (Win, CE)

Driver for Beckhoff BC/BK9000. The driver is based on the TC-ADS interface and uses a protocol optimized for the bus clamps.